Alcatel 1SE 2020 vs Huawei Enjoy 10s: Which phone to buy?

Alcatel released the Alcatel 1SE 2020 in 2020, while Huawei introduced Enjoy 10s in 2019. Also, each of them is a budget device. Here, we compare Alcatel 1SE 2020 vs Huawei Enjoy 10s to guide you to select a handset that's better suited to your needs.

We get commissions for purchases made through links in this post. As an Amazon Associate we earn from qualifying purchases. Learn more
Alcatel 1SE 2020Enjoy 10s
Pros
Pros
  • High battery life
  • Lower weight
  • Higher resolution OLED display
  • Better main camera
  • Higher performance chipset
  • High battery life
Cons
Cons
  • Plastic back
  • Heavier
  • Low-resolution display
  • No Bluetooth 5
  • No USB-C
  • Plastic back

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Specifications

Alcatel 1SE 2020Enjoy 10s
CHIPSET
CHIPSETUnisoc SC9863A
Kirin 710F
CPU
CPUOcta-core
Octa-core
GPU
GPUIMG8322
Mali-G51 MP4
RAM
RAM2GB, 3GB, or 4GB4GB, 6GB, or 8GB
STORAGE
STORAGE32GB, 64GB, or 128GB
MicroSD
64GB or 128GB
Nano Memory
DISPLAY
DISPLAYIPS LCD
6.22 inches
720 x 1520
270 ppi
OLED
6.3 inches
1080 x 2400
418 ppi
REAR CAMERA
REAR CAMERA13 MP main
5 MP ultrawide
2 MP depth
1080p@30fps
48 MP main
8 MP ultrawide
2 MP depth
1080p@30fps
FRONT CAMERA
FRONT CAMERA5 MP selfie
1080p@30fps
16 MP selfie
1080p@30fps
BATTERY
BATTERY4000 mAh
4000 mAh

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Design

The Alcatel 1SE 2020 is 159.2 x 75.2 x 8.7 mm in size, and Enjoy 10s is 157.4 x 73.2 x 7.8 mm in dimension. Both of them are thus large. Consequently, these are difficult to use with a single hand and harder to fit in a pocket.

Alcatel 1SE 2020 has a weight of 175 g. On the other hand, Enjoy 10s weighs in at 163 g. Alcatel's phone is, thus, heavier compared to Huawei's phone.

Both phones have low-end builds. Each of them uses glass as the front material and plastic as the body material.

There are small bezels on the Alcatel 1SE 2020, and the Enjoy 10s features a bezel-less front side. Therefore, both are elegant looking with a bigger screen to body ratio.

The two devices are not water-resistant. As a result, you must safeguard both of them from water.

Alcatel 1SE 2020 comes in Power Gray and Agate Greeen shades. On the other hand, Enjoy 10s arrives in Emerald Green, Breathing Crystal, and Midnight Black shades.

Both Alcatel 1SE 2020 and Enjoy 10s are of similar build quality overall and we can consider this a tie.

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Display

Alcatel 1SE 2020 features an IPS LCD screen of 6.22 inches. On the other hand, Enjoy 10s got a 6.3-inch OLED display. Alcatel's phone also has a resolution of 720 x 1520 in its display and a 270 ppi density. On the other hand, the display of Huawei's phone has a resolution of 1080 x 2400 and a 418 ppi density.

Alcatel 1SE 2020 display also has a 19:9 aspect ratio. On the other hand, the Enjoy 10s display has an aspect ratio of 20:9.

Videos look amazing on the Enjoy 10s's display. It provides vivid colors because of the higher resolution. Because of the OLED technology, it also has a deep black color.

Both phones have small notches at the top of their displays for the front-facing cameras. Usually, they both are not a distraction for most of the users.

Because of the better OLED technology and the higher resolution, Enjoy 10s has a much better display than the Alcatel 1SE 2020.

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Camera

Rear camera

Alcatel 1SE 2020 has a 13 MP main camera with an aperture of f/2.2, a 5 MP ultrawide camera with an aperture of f/2.2, and a 2 MP depth camera with an aperture of f/2.4. On the other hand, Enjoy 10s comes with a 48 MP main camera with an aperture of f/1.8, an 8 MP ultrawide camera with an aperture of f/2.4, and a 2 MP depth camera with an aperture of f/2.4.

The main camera of the Enjoy 10s has higher quality compared to the Alcatel 1SE 2020 main camera. It produces clearer images with minimal noise. The daylight images also look better thanks to the high amount of detail and lively colors.

Enjoy 10s main camera also supports phase detection autofocus for faster focusing.

Both main cameras have an HDR mode to provide a wider color range.

The ultrawide cameras of both phones provide a higher field of view. Therefore, it is easier to take wide group photos with both of them.

The depth cameras of both phones capture the depth information required for the portraits. Because of these cameras, both phones support the bokeh effect in the portrait mode.

Each phone can capture 1080p videos at 30fps from the main cameras.

Overall, Enjoy 10s has a better back camera setup than the Alcatel 1SE 2020.

Front camera

Alcatel 1SE 2020 has a 5 MP selfie camera with an aperture of f/2.2. On the other hand, Enjoy 10s has a 16 MP selfie camera with an aperture of f/2.0.

Selfie cameras of both phones also support HDR.

Both phones also support recording 1080p selfie videos at 30fps.

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Performance

Alcatel 1SE 2020 comes with the Unisoc SC9863A chipset. It has an Octa-core CPU. Enjoy 10s, on the other hand, uses the Kirin 710F chipset. It also has an Octa-core CPU. However, the CPU of the Kirin 710F has a higher performance.

The chipset of the Alcatel 1SE 2020 uses the IMG8322 GPU. On the other hand, the chipset of the Enjoy 10s comes with the Mali-G51 MP4 GPU. Furthermore, Mali-G51 MP4 provides a higher performance than the IMG8322.

The following diagram shows the AnTuTu V9 performance benchmarks for the two devices.

Alcatel 1SE 2020

120474

Huawei Enjoy 10s

207711

Enjoy 10s has a moderate performance. As a result, it can handle gaming at decent quality settings smoothly. It also works well for everyday use. However, Alcatel 1SE 2020 only has a lower performance. Therefore, it can only handle less demanding games.

Alcatel's phone features 2GB, 3GB, or 4GB of memory, whereas Huawei's phone features 4GB, 6GB, or 8GB of memory.

Alcatel 1SE 2020 also features 32GB, 64GB, or 128GB of storage, whereas Enjoy 10s has 64GB or 128GB of storage. Both of them also come with expandable storage.

Because of the faster chipset, Enjoy 10s has a higher performance than the Alcatel 1SE 2020.

Alcatel 1SE 2020 vs Huawei Enjoy 10s: Battery and charging

Both phones have a battery capacity of 4000 mAh. Thanks to the bigger batteries, each phone also provides a longer battery life.

Sound comparison

Each phone has a headphone jack and we can easily use our own headphones without any issue.

Furthermore, both phones come with a single speaker and therefore they both don't create stereo sound.

Software and additional features comparison

Alcatel 1SE 2020 comes with Android 10, whereas Enjoy 10s comes with Android 9.0.

Alcatel 1SE 2020 features a capacitive fingerprint scanner at the back. On the other hand, Enjoy 10s has an in-screen optical fingerprint sensor.

Huawei's phone comes with Bluetooth 5.0. As a result, it has up-to-date support for the latest Bluetooth 5.0 devices. However, Alcatel's phone only has Bluetooth 4.2. As a result, it only provides limited support for the latest generation devices.

Alcatel's phone only has a micro USB port, whereas Huawei's phone has a USB Type-C port.

Conclusion

Enjoy 10s is the winner here. As a result, if you need a phone that comes with a lower weight, a higher quality OLED screen, a higher performance, and a higher quality main camera, it is better to get the Enjoy 10s. It also has Bluetooth 5 and a USB Type-C port. However, Alcatel 1SE 2020 is also a worthy option for day-to-day use.